MFG Part Number 1550.00

WL5000

Legacy Product

WL Series Liquid Cooling System

Note: This product has reached end of production. Please use the recommended replacement.
Please click the [Remaining Inventory] button to see inventory available.
The recommended replacement is:
      MFG Part Number: 387009381.02
      Description: LA5000
The WL5000 is a re-circulating liquid to air heat exchanger that offers dependable, compact performance by removing large amounts of heat from a liquid circuit. The coolant is re-circulated using a high-pressure pump to assure maximum flow rate. Heat from coolant is absorbed by a radiant heat exchanger and dissipated into the ambient environment using brand name fan. Manual adjustments can be made to control flow switch. Customized features are available, however, MOQ applies.

Features

  • Cooling to ambient
  • High heat pumping capacity
  • Compact form factor
  • Long life operation

技术指标

性能
标称冷却功率
5,000 W
标称运行流速 (60 Hz)
6.0 升/分 @ 6.4 巴
标称运行流速 (50 Hz)
6.0 升/分 @ 6.0 巴
运行
冷却液
Water or Water/Glycol
运行温度
5°C to 40°C
储存温度范围（不含冷却液）
-25°C to 70°C
湿度范围
20% to 80%
储存湿度范围
5% to 95%, non-condensing
输入电压
230 VAC
频率
50/60 Hz
电流
< 2.6 A
Noise
< 67 dB(A)
Flow Switch Open
≤ 4 L/min
最大正向压力
7 巴
物理尺寸
高度
481 mm
长度
483 mm
宽度
406 mm
重量
38.5 kg
冷却液容量
5 Liters
耦合
Press Fit (9 mm ID hose)
Features
Applications
Compact design
Medical imaging systems
Reliable operation
Adjustable flow switch
X-Ray scanning systems
Bypass valve protection
Semiconductor fabrication

Fluid Operating Points

Select Graph


100% Water
Cooling Power (Qc) = Watts
Thermal Conductance = W/°C
ΔT (Ambient-Coolant)* = °C
ΔT (Outlet-Inlet)** @ 6.0 L/min = °C
70/30 Water-Glycol
Cooling Power (Qc) = Watts
Thermal Conductance = W/°C
ΔT (Ambient-Coolant)* = °C
ΔT (Outlet-Inlet)** @ 6.0 L/min = °C
60/40 Water-Glycol
Cooling Power (Qc) = Watts
Thermal Conductance = W/°C
ΔT (Ambient-Coolant)* = °C
ΔT (Outlet-Inlet)** @ 6.0 L/min = °C
50/50 Water-Glycol
Cooling Power (Qc) = Watts
Thermal Conductance = W/°C
ΔT (Ambient-Coolant)* = °C
ΔT (Outlet-Inlet)** @ 6.0 L/min = °C

* ΔT (Ambient-Coolant) is the temperature difference between the ambient temperature and the coolant temperature that is at the outlet of the heat exchanger during steady-state operation. This temperature difference would initially be 0 and increase to the steady state value under load. This would also be the temperature at the inlet to the application.

** ΔT (Outlet-Inlet) is the temperature difference between the inlet temperature and the outlet temperature of the application at the nominal coolant flow. More flow (application pressure drop less than nominal) would necessarily mean a smaller ΔT.


Notes

  1.  Check coolant level regularly. For optimal cooling performance, coolant level should always be above radiator fins.
  2.  Hose selection should be of material and thickness to support pressure resistance and coolant type.
  3.  Manual adjustments can be made to control pressure and flow rate.
  4.  Check pump filter and dust on heat exchanger periodically for cleaning.

Tark 及其代理机构所提供的任何信息，无论是规格参数、数据表、产品目录还是其他信息，都被认为是（但不保证是）准确和可靠，仅供参考， 并不构成与Tark合同的任何部分。所有规格参数如有更改，恕不另行通知。对于因使用或依赖此信息而造成的损失或损害， Tark 不承担任何责任。所有 Tark 产品在销售时均受当时有效的 Tark 销售条款和条件（包括 Tark 有限保修）约束，如有需要，将根据要求提供副本。

© Copyright 2019-2025 Tark Thermal Solutions, Inc. All rights reserved. Tark™, the Tark Logo, and Tark Thermal Solutions™ are trademarks or registered trademarks of Tark Limited or its subsidiaries.

Revision: 00 Date: 06-01-2022

Print Date: 05-07-2025