Invalid Part Number

Specifications


Finishing Options

Sealing Options

Electrical and Thermal Performance

For maximum performance, be sure to orient the CONTROL side of the TEC against the application to be managed and the AMBIENT side against the heat sink or other heat rejection method. The CONTROL side is always opposite the side with lead attachments. Lead attachment is a passive heat loss and less impactful if located on the side that attaches to the heat exchanger.

Use the sliders, input fields and [UPDATE] button below to enter your application's electrical and thermal conditions. Use the Graph Y and X Axis buttons to display a variety of performance curves and use the Voltage/Current slider to choose the electrical operating point to display performance.
Click the [Custom Datasheet] button to save your results as a Customized PDF Datasheet.

Select Graph Y - Axis

Select Graph X - Axis

Optimum Heating COP
Total Heat (Qh) = Watts
Current = Amps
Voltage = Volts
Power Supply (Pin)= Watts
Heating COP (Qh/Pin) =
Heat Pumped from Ambient (Qc) = Watts
Maximum Heating (Qh)
Total Heat (Qh) = 0 Watts
Current = 0 Amps
Voltage = 0 Volts
Power Supply (Pin) = 0 Watts
Heating COP (Qh/Pin) =
Heat Pumped from Ambient (Qc) = 0 Watts

Electrical Operating Point

Imin: 0.0 A
Imax: 0.0 A

Vmin: 0.0 V
Vmax: 0.0 V
Voltage

Current
Total Heat (Qh)

Power Supply (Pin)

COP (Qh/Pin)

Heat Pumped from Ambient (Qc)

TEC Cold Temperature at Ambient (Tc)

TEC Hot Temperature at Control (Th)

Thermal Operating Conditions

Cooling
Heating
Ambient High Temperature
Control Temperature
Ambient Low Temperature
Cooling ΔT
Heating ΔT
Ambient Side
Thermal Resistance  
Control Side
Thermal Resistance  
Click to UPDATE performance after changing thermal operating conditions or switching between heating and cooling mode.

Notes

  1.  
  2.  

Any information furnished by Tark and its agents, whether in specifications, data sheets, product catalogues or otherwise, is believed to be (but is not warranted as being) accurate and reliable, is provided for information only and does not form part of any contract with Tark. All specifications are subject to change without notice. Tark assumes no responsibility and disclaims all liability for losses or damages resulting from use of or reliance on this information. All Tark products are sold subject to the Tark Terms and Conditions of sale (including Tark's limited warranty) in effect from time to time, a copy of which will be furnished upon request.

© Copyright 2019-2025 Tark Thermal Solutions, Inc. All rights reserved. Tark™, the Tark Logo, and Tark Thermal Solutions™ are trademarks or registered trademarks of Tark Limited or its subsidiaries.

Revision: Date:
Print Date: 05-06-2025