MFG Part Number 1104.01

WW3001

WL Series Liquid Cooling System

The WW3001 uses facility water as a hot side heat dissipation mechanism, which increases the cooling capacity while maintaining form factor. The WW Series system is designed to operate using water as coolant.

Features

  • Cooling to ambient
  • High heat pumping capacity
  • Compact form factor
  • Long life operation

Technical Specifications

Performance
Nominal Cooling Capacity
3,000 W
Nominal Operating Flowrate (60 Hz)
5.4 L/min @ 4.0 Bar
Nominal Operating Flowrate (50 Hz)
5.4 L/min @ 4.0 Bar
Operation
Coolant
Water
Operating Temperature
0°C to 40°C
Storage temperature range (w/o coolant)
-20°C to 70°C
Humidity range
10% to 90%
Storage Humidity range
5% to 95%, non-condensing
Input Voltage
230 VAC
Frequency
50/60 Hz
Current
< 1.8 Amps
Noise
< 47 dB(A)
Flow Switch Open
≤ 4 L/min
Maximum Forward Pressure
6.5 Bar
Physical
Height
400 mm
Length
450 mm
Width
270 mm
Weight
27 kg
Coolant Capacity
8.5 Liters
Couplings
Press Fit (9 mm ID hose)

Fluid Operating Points

Select Graph

* ΔT (Coolant Outlet - Facility Water In) is the temperature difference between the facility water temperature and the coolant temperature that is at the outlet of the heat exchanger during steady-state operation. This temperature difference would initially be 0 and increase to the steady state value under load. This would also be the temperature at the inlet to the application.

** ΔT (Coolant Return - Facility Water In) is the temperature difference between the facility water temperature and the outlet temperature of the application at the nominal coolant flow. More flow (application pressure drop less than nominal) would necessarily mean a smaller ΔT.

Any information furnished by Tark and its agents, whether in specifications, data sheets, product catalogues or otherwise, is believed to be (but is not warranted as being) accurate and reliable, is provided for information only and does not form part of any contract with Tark. All specifications are subject to change without notice. Tark assumes no responsibility and disclaims all liability for losses or damages resulting from use of or reliance on this information. All Tark products are sold subject to the Tark Terms and Conditions of sale (including Tark's limited warranty) in effect from time to time, a copy of which will be furnished upon request.

© Copyright 2019-2025 Tark Thermal Solutions, Inc. All rights reserved. Tark™, the Tark Logo, and Tark Thermal Solutions™ are trademarks or registered trademarks of Tark Limited or its subsidiaries.

Revision: 00 Date: 03-16-2024

Print Date: 05-07-2025